Weifang Baite Magnet Technology co.,Ltd.
Weifang Baite Magnet Technology co.,Ltd.
Introduction:
SH series block proof rotary drum screen is a new screening equipment based on the advantages of similar products both at home and
abroad. It has a simple structure and is easy to maintain. This equipment has no vibration and noise. With a high screen transmittance
rate, it is particularly suitable for the screening of wet and sticky materials. The screen pores can never be blocked. SH series block
proof rotary drum screen is widely used for the screening and grading of coal, sand, gravel and other materials in electric power, mining,
metallurgy, building materials, chemical and other industries.
Features
1) Configured for classification, screening and grading
2) Simple structure, higher reliability, low investment cost
3) Large processing capacities
4) Smooth running, low noise
5) Easy maintenance
6) Unique screen design, result in higher capacities, longer screen life and less blocking of mesh screen
Working principle
The rotary drum device is connected with the motor by shaft coupling through motor reducer, and is driven by the motor to rotate around the axis shaft line.
When the materials flow into the rotary drum device, as a result of the inclination and rotation of the rotary drum device, the materials on the screen surface
will rotate and roll, finally the qualified materials (undersize materials) will be discharged through the screen mesh which is installed around the excircle of
the rotary drum, and the unqualified materials (oversize materials) will be discharged from the end of the rotary drum. The materials rotate and roll in the
rotary drum, so the materials stuck in screen pores can be ejected out to prevent the screen pores from being blocked.
Technical Parameter
| NO. | Model | Diameter of roller （mm） | Length of roller（mm） | Capacity (t/h) | Rotation soeed（r/min） | Driving Power （kw） | Discharging size (mm) |
| 1 | SH-1020 | 1000 | 2000 | 60-80 | 15 | 4.0 | 10-13 |
| 2 | SH-1226 | 1200 | 2600 | 80-100 | 4.0 | ||
| 3 | SH-1235 | 1200 | 3500 | 160-180 | 5.5 | ||
| 4 | SH-1248 | 1200 | 4800 | 250-300 | 7.5 | ||
| Note:Models can be customized according to per customer's requirements. | |||||||
Introduction:
SH series block proof rotary drum screen is a new screening equipment based on the advantages of similar products both at home and
abroad. It has a simple structure and is easy to maintain. This equipment has no vibration and noise. With a high screen transmittance
rate, it is particularly suitable for the screening of wet and sticky materials. The screen pores can never be blocked. SH series block
proof rotary drum screen is widely used for the screening and grading of coal, sand, gravel and other materials in electric power, mining,
metallurgy, building materials, chemical and other industries.
Features
1) Configured for classification, screening and grading
2) Simple structure, higher reliability, low investment cost
3) Large processing capacities
4) Smooth running, low noise
5) Easy maintenance
6) Unique screen design, result in higher capacities, longer screen life and less blocking of mesh screen
Working principle
The rotary drum device is connected with the motor by shaft coupling through motor reducer, and is driven by the motor to rotate around the axis shaft line.
When the materials flow into the rotary drum device, as a result of the inclination and rotation of the rotary drum device, the materials on the screen surface
will rotate and roll, finally the qualified materials (undersize materials) will be discharged through the screen mesh which is installed around the excircle of
the rotary drum, and the unqualified materials (oversize materials) will be discharged from the end of the rotary drum. The materials rotate and roll in the
rotary drum, so the materials stuck in screen pores can be ejected out to prevent the screen pores from being blocked.
Technical Parameter
| NO. | Model | Diameter of roller （mm） | Length of roller（mm） | Capacity (t/h) | Rotation soeed（r/min） | Driving Power （kw） | Discharging size (mm) |
| 1 | SH-1020 | 1000 | 2000 | 60-80 | 15 | 4.0 | 10-13 |
| 2 | SH-1226 | 1200 | 2600 | 80-100 | 4.0 | ||
| 3 | SH-1235 | 1200 | 3500 | 160-180 | 5.5 | ||
| 4 | SH-1248 | 1200 | 4800 | 250-300 | 7.5 | ||
| Note:Models can be customized according to per customer's requirements. | |||||||
Online Message