Weifang Baite Magnet Technology co.,Ltd.
Introduction
It can feed block or granule materials from the storage silo to charging device evenly and continuously. It can be also used for automatic matching, quantitative
package, automatic regulating process.
The vibrating feeder always works together with vibrating conveyor, vibrating screen, chain bucket elevator, crusher, ball mill, and so on. In mining industry,
it is always used to feed ball mill evenly.
Features
1. Small volume, light weight, simple structure, easy to assemble.
2. Small power consumption because it works nearly in the state of critical sympathetic vibration.
3. Control device use half wave silicon controlled rectifier circuit , hence the feeding quantity can realize the stepless adjustment easily.
4. Since the feeding material volume can be changed, started or stopped instantaneously, the feeding quantity can be controlled accurately.
5. The feeder is kept being threw up during feeding process, so the abrasion to the trough is small. working principle:
Motor vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whos
e gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to
produce a linear huge power which forces the feeder to vibrate. Through the vibration, The materials will slip and sling on the funnel, moving forward, when the
materials pass the screening part, smaller parts will fall down, avoiding the further crushing, so screening purpose can be reached.
overal Dimension Drawing
Working Principle Drawing
Technical Parameter
NO. | Model | Capacity (t/h) | Dimension of trough (mm) | Granularity (≤mm) | Mood | Vibrating motor | |
Model | Power(kw) | ||||||
1 | DZ30-4 | 15 | 300×800×120 | 120 | Continuous | 2.5-4 | 0.18×2 |
2 | DZ40-4 | 40 | 400×1000×160 | 5-4 | 0.25×2 | ||
3 | DZ50-4 | 50 | 500×1100×200 | 8-4 | 0.40×2 | ||
4 | DZ60-4 | 85 | 600×1200×250 | 150 | 16-4 | 0.75×2 | |
5 | DZ70-4 | 100 | 700×1300×280 | 180 | 16-4 | 0.75×2 | |
6 | DZ80-4 | 200 | 800×1600×300 | 200 | 16-4 | 0.75×2 | |
7 | DZ90-4 | 220 | 900×1600×350 | 250 | 20-4 | 1.1×2 | |
8 | DZ100-4 | 240 | 1000×1600×350 | 32-4 | 1.5×2 | ||
9 | DZ1100-4 | 400 | 1100×1800×400 | 350 | 32-4 | 1.5×2 | |
10 | DZ120-4 | 440 | 1200×2000×400 | 32-4 | 1.5×2 | ||
11 | DZ130-4 | 475 | 1300×2200×400 | 32-4 | 1.5×2 | ||
12 | DZ70-6 | 80 | 700×1300×280 | 150 | 20-6 | 1.5×2 | |
13 | DZ80-6 | 160 | 800×1600×300 | 180 | 30-6 | 2.2×2 | |
14 | DZ90-6 | 240 | 900×1600×350 | 240 | 40-6 | 3.0×2 | |
15 | DZ110-6 | 320 | 1100×1600×350 | 50-6 | 3.7×2 | ||
16 | DZ130-6 | 400 | 1300×2200×400 | 320 | 50-6 | 3.7×2 | |
17 | DZ150-6 | 500 | 1500×2400×400 | 50-6 | 3.7×2 |
Introduction
It can feed block or granule materials from the storage silo to charging device evenly and continuously. It can be also used for automatic matching, quantitative
package, automatic regulating process.
The vibrating feeder always works together with vibrating conveyor, vibrating screen, chain bucket elevator, crusher, ball mill, and so on. In mining industry,
it is always used to feed ball mill evenly.
Features
1. Small volume, light weight, simple structure, easy to assemble.
2. Small power consumption because it works nearly in the state of critical sympathetic vibration.
3. Control device use half wave silicon controlled rectifier circuit , hence the feeding quantity can realize the stepless adjustment easily.
4. Since the feeding material volume can be changed, started or stopped instantaneously, the feeding quantity can be controlled accurately.
5. The feeder is kept being threw up during feeding process, so the abrasion to the trough is small. working principle:
Motor vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whos
e gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to
produce a linear huge power which forces the feeder to vibrate. Through the vibration, The materials will slip and sling on the funnel, moving forward, when the
materials pass the screening part, smaller parts will fall down, avoiding the further crushing, so screening purpose can be reached.
overal Dimension Drawing
Working Principle Drawing
Technical Parameter
NO. | Model | Capacity (t/h) | Dimension of trough (mm) | Granularity (≤mm) | Mood | Vibrating motor | |
Model | Power(kw) | ||||||
1 | DZ30-4 | 15 | 300×800×120 | 120 | Continuous | 2.5-4 | 0.18×2 |
2 | DZ40-4 | 40 | 400×1000×160 | 5-4 | 0.25×2 | ||
3 | DZ50-4 | 50 | 500×1100×200 | 8-4 | 0.40×2 | ||
4 | DZ60-4 | 85 | 600×1200×250 | 150 | 16-4 | 0.75×2 | |
5 | DZ70-4 | 100 | 700×1300×280 | 180 | 16-4 | 0.75×2 | |
6 | DZ80-4 | 200 | 800×1600×300 | 200 | 16-4 | 0.75×2 | |
7 | DZ90-4 | 220 | 900×1600×350 | 250 | 20-4 | 1.1×2 | |
8 | DZ100-4 | 240 | 1000×1600×350 | 32-4 | 1.5×2 | ||
9 | DZ1100-4 | 400 | 1100×1800×400 | 350 | 32-4 | 1.5×2 | |
10 | DZ120-4 | 440 | 1200×2000×400 | 32-4 | 1.5×2 | ||
11 | DZ130-4 | 475 | 1300×2200×400 | 32-4 | 1.5×2 | ||
12 | DZ70-6 | 80 | 700×1300×280 | 150 | 20-6 | 1.5×2 | |
13 | DZ80-6 | 160 | 800×1600×300 | 180 | 30-6 | 2.2×2 | |
14 | DZ90-6 | 240 | 900×1600×350 | 240 | 40-6 | 3.0×2 | |
15 | DZ110-6 | 320 | 1100×1600×350 | 50-6 | 3.7×2 | ||
16 | DZ130-6 | 400 | 1300×2200×400 | 320 | 50-6 | 3.7×2 | |
17 | DZ150-6 | 500 | 1500×2400×400 | 50-6 | 3.7×2 |
Online Message