Weifang Baite Magnet Technology co.,Ltd.
Weifang Baite Magnet Technology co.,Ltd.
Introduction:
Double roller crusher is suitable for such solid materials that compression strength less than 300Mpa, moisture less than 35 %, and usually for fine and
intermediate crushing. It can be widely used in mining , thermal power , cement, ceramics , metallurgy, chemical industry, building materials industry.
Features: low maintenance ratio, reliable performance , low dust, low noise .
Double roller crusher is configured with two crushing rollers , according to the granularity user needs, the roll surface is divided into two forms: flat
surface and welding roller surface, heavier models can be selected if the compressive strength of the material is more than 200Mpa .
Flat roller surface models is suitable for the following technical requirements: feed size less than 80mm, finished size 0.5-10mm . Such as the use of
pebbles , construction waste making sand ; mining crushing iron ore, quartz stone ; ceramic industry break raw materials ; metallurgical industry
crushing coke , quicklime ; coking plant finely pulverized etc, or at similar crushing occasions.
Welding roller surface models suitable for feed size less than 150mm, finished size 3 - 30mm in crushing operations. It can be used in the pre-crushing
of cement clinker in cement industry , limestone and composites; CWS industry pre- crushing coal; iron ore industry pre-crushing slag , iron ore,
silicon ore; brick factories crushing all kinds of ore to make unburned brick ; power plant crushing coal; or at similar crushing occasions .
Feature:
--.Compact structure, reliable performance
--.Low noise and high efficiency
--.Easy to install and only need simple foundation
--.It can adjust the pressure and size easily, and can be made to meet the customer’s request
--.Self-protection, the parts can not be damaged when hard materials such as the metals goes into the crushing cavity
--.Low attrition rate and easy to maintain
overal Dimension Drawing
Working Principle Drawing
Technical Parameter
| NO. | Model | Feeding size (mm) | Discharging size (mm) | Capacity (t/h) | Driving Power（kw） | Protcetion mode | Driving | |
| Standard | Heavy type | |||||||
| 1 | 2PG0202PT | ＜10 | 0.5-5 | 0.5-10 | 2.2x2 | 3x2 | Spring or hydraulic triangular belt or coupling | Triangular belt or coupling |
| 2 | 2PG0404PT | ＜30 | 0.5-10 | 3-30 | 4x2 | 5.5x2 | ||
| 3 | 2PG0605PT | ＜40 | 0.5-20 | 6-50 | 11x2 | 15x2 | ||
| 4 | 2PG0806PT | ＜60 | 0.5-20 | 10-100 | 15x2 | 18.5x2 | ||
| 5 | 2PG1008PT(Y) | ＜80 | 0.5-30 | 15-130 | 22x2 | 30x2 | ||
| 6 | 2PG1208PT(Y) | ＜90 | 0.5-40 | 30-250 | 30x2 | 37x2 | ||
| 7 | 2PG1212PT(Y) | ＜90 | 0.5-40 | 40-350 | 45x2 | 55x2 | ||
| 8 | 2PG1612PT(Y) | ＜110 | 0.5-50 | 60-420 | 55x2 | 75x2 | ||
| 9 | 2PG1616PT(Y) | ＜110 | 0.5-50 | 75-550 | 90x2 | 110x2 | ||
| 10 | 2PG1816PT(Y) | ＜130 | 0.5-50 | 90-700 | 110x2 | 132x2 | ||
Introduction:
Double roller crusher is suitable for such solid materials that compression strength less than 300Mpa, moisture less than 35 %, and usually for fine and
intermediate crushing. It can be widely used in mining , thermal power , cement, ceramics , metallurgy, chemical industry, building materials industry.
Features: low maintenance ratio, reliable performance , low dust, low noise .
Double roller crusher is configured with two crushing rollers , according to the granularity user needs, the roll surface is divided into two forms: flat
surface and welding roller surface, heavier models can be selected if the compressive strength of the material is more than 200Mpa .
Flat roller surface models is suitable for the following technical requirements: feed size less than 80mm, finished size 0.5-10mm . Such as the use of
pebbles , construction waste making sand ; mining crushing iron ore, quartz stone ; ceramic industry break raw materials ; metallurgical industry
crushing coke , quicklime ; coking plant finely pulverized etc, or at similar crushing occasions.
Welding roller surface models suitable for feed size less than 150mm, finished size 3 - 30mm in crushing operations. It can be used in the pre-crushing
of cement clinker in cement industry , limestone and composites; CWS industry pre- crushing coal; iron ore industry pre-crushing slag , iron ore,
silicon ore; brick factories crushing all kinds of ore to make unburned brick ; power plant crushing coal; or at similar crushing occasions .
Feature:
--.Compact structure, reliable performance
--.Low noise and high efficiency
--.Easy to install and only need simple foundation
--.It can adjust the pressure and size easily, and can be made to meet the customer’s request
--.Self-protection, the parts can not be damaged when hard materials such as the metals goes into the crushing cavity
--.Low attrition rate and easy to maintain
overal Dimension Drawing
Working Principle Drawing
Technical Parameter
| NO. | Model | Feeding size (mm) | Discharging size (mm) | Capacity (t/h) | Driving Power（kw） | Protcetion mode | Driving | |
| Standard | Heavy type | |||||||
| 1 | 2PG0202PT | ＜10 | 0.5-5 | 0.5-10 | 2.2x2 | 3x2 | Spring or hydraulic triangular belt or coupling | Triangular belt or coupling |
| 2 | 2PG0404PT | ＜30 | 0.5-10 | 3-30 | 4x2 | 5.5x2 | ||
| 3 | 2PG0605PT | ＜40 | 0.5-20 | 6-50 | 11x2 | 15x2 | ||
| 4 | 2PG0806PT | ＜60 | 0.5-20 | 10-100 | 15x2 | 18.5x2 | ||
| 5 | 2PG1008PT(Y) | ＜80 | 0.5-30 | 15-130 | 22x2 | 30x2 | ||
| 6 | 2PG1208PT(Y) | ＜90 | 0.5-40 | 30-250 | 30x2 | 37x2 | ||
| 7 | 2PG1212PT(Y) | ＜90 | 0.5-40 | 40-350 | 45x2 | 55x2 | ||
| 8 | 2PG1612PT(Y) | ＜110 | 0.5-50 | 60-420 | 55x2 | 75x2 | ||
| 9 | 2PG1616PT(Y) | ＜110 | 0.5-50 | 75-550 | 90x2 | 110x2 | ||
| 10 | 2PG1816PT(Y) | ＜130 | 0.5-50 | 90-700 | 110x2 | 132x2 | ||
Online Message