Weifang Baite Magnet Technology co.,Ltd.
Weifang Baite Magnet Technology co.,Ltd.
Introduction:
Wet drum magnetic separator is requisite equipment for concentration plant of iron mine, of which the performance and steadiness plays
a vital part in the economic benefit of iron mine. Wet drum separator has always classified by granularity of feeding material. While in
practical manufacture, the required performance is different for drum separator of the same style from one procedure to another. A long
term research in different performances required by different procedure, we developed drum separator specially for different procedure.
Features:
-- Wet drum magnetic separator have high magnetic recovery and discharge.
-- The feed slurries recover the magnetic materials.
-- Available in single or multiple drum applications.
-- Recover magnetic solids in as clean a magnetic concentrate as possible.
-- Permanent magnet assembly eliminates coil burn-outs.
-- The magnet / pole elements are bolted to a mild steel shaft.
-- The drum is made from thick stainless steel for long service life.
overal Dimension Drawing
Working Principle Drawing
Technical Parameter
| NO. | Model | Roller size (mm) | Roller surface magnetic induction density(GS) | Capacity | Driving Power（kw） | Roller rotating speed (r/min) | Weigh（kg) | |||
| Geometric center value | Sweeping and separating area average value | Highest magnetic density | T/h | m³/h | ||||||
| 1 | CTS（N、B）-618 | 600×1800 | 1400 | 1000-4500 | 2000-6000 | 15-30 | 48 | 2.2 | 40 | 1300 |
| 2 | CTS（N、B）-712 | 750×1200 | 1400 | 1000-4500 | 2000-6000 | 15-30 | 48 | 3 | 35 | 1500 |
| 3 | CTS（N、B）-718 | 750×1800 | 1600 | 1000-4500 | 2000-6000 | 20-28 | 72 | 3 | 28 | 2100 |
| 4 | CTS（N、B）-918 | 900×1800 | 1600 | 1000-4500 | 2000-6000 | 25-55 | 90 | 4 | 28 | 2600 |
| 5 | CTS（N、B）-924 | 900×2400 | 1600 | 1000-4500 | 2000-6000 | 35-70 | 110 | 4 | 28 | 3000 |
| 6 | CTS（N、B）-1021 | 1050×2100 | 1600 | 1000-4500 | 2000-6000 | 55-110 | 160 | 5.5 | 22 | 3500 |
| 7 | CTS（N、B）-1024 | 1050×2400 | 1600 | 1000-4500 | 2000-6000 | 55-110 | 160 | 5.5 | 22 | 3500 |
| 8 | CTS（N、B）-1030 | 1050×3000 | 1600 | 1000-4500 | 2000-6000 | 70-120 | 200 | 7.5 | 22 | 4500 |
| 9 | CTS（N、B）-1230 | 1200×3000 | 1600 | 1000-4500 | 2000-6000 | 70-120 | 200 | 11 | 22 | 5000 |
| 10 | CTS（N、B）-1240 | 1200×4000 | 1600 | 1000-4500 | 2000-6000 | 100-150 | 250 | 15 | 22 | 6000 |
| 11 | CTS（N、B）-1530 | 1500×3000 | 1800 | 1000-4500 | 2000-6000 | 120-150 | 220 | 15 | 20 | 6500 |
| 12 | CTS（N、B）-1540 | 1500×4000 | 1800 | 1000-4500 | 2000-6000 | 150-180 | 300 | 18.5 | 20 | 8000 |
| Note:The strength of the magnetic field can be customized according to customer requirements,from 800gs-10000gs.piease indicate in the contract. | ||||||||||
Introduction:
Wet drum magnetic separator is requisite equipment for concentration plant of iron mine, of which the performance and steadiness plays
a vital part in the economic benefit of iron mine. Wet drum separator has always classified by granularity of feeding material. While in
practical manufacture, the required performance is different for drum separator of the same style from one procedure to another. A long
term research in different performances required by different procedure, we developed drum separator specially for different procedure.
Features:
-- Wet drum magnetic separator have high magnetic recovery and discharge.
-- The feed slurries recover the magnetic materials.
-- Available in single or multiple drum applications.
-- Recover magnetic solids in as clean a magnetic concentrate as possible.
-- Permanent magnet assembly eliminates coil burn-outs.
-- The magnet / pole elements are bolted to a mild steel shaft.
-- The drum is made from thick stainless steel for long service life.
overal Dimension Drawing
Working Principle Drawing
Technical Parameter
| NO. | Model | Roller size (mm) | Roller surface magnetic induction density(GS) | Capacity | Driving Power（kw） | Roller rotating speed (r/min) | Weigh（kg) | |||
| Geometric center value | Sweeping and separating area average value | Highest magnetic density | T/h | m³/h | ||||||
| 1 | CTS（N、B）-618 | 600×1800 | 1400 | 1000-4500 | 2000-6000 | 15-30 | 48 | 2.2 | 40 | 1300 |
| 2 | CTS（N、B）-712 | 750×1200 | 1400 | 1000-4500 | 2000-6000 | 15-30 | 48 | 3 | 35 | 1500 |
| 3 | CTS（N、B）-718 | 750×1800 | 1600 | 1000-4500 | 2000-6000 | 20-28 | 72 | 3 | 28 | 2100 |
| 4 | CTS（N、B）-918 | 900×1800 | 1600 | 1000-4500 | 2000-6000 | 25-55 | 90 | 4 | 28 | 2600 |
| 5 | CTS（N、B）-924 | 900×2400 | 1600 | 1000-4500 | 2000-6000 | 35-70 | 110 | 4 | 28 | 3000 |
| 6 | CTS（N、B）-1021 | 1050×2100 | 1600 | 1000-4500 | 2000-6000 | 55-110 | 160 | 5.5 | 22 | 3500 |
| 7 | CTS（N、B）-1024 | 1050×2400 | 1600 | 1000-4500 | 2000-6000 | 55-110 | 160 | 5.5 | 22 | 3500 |
| 8 | CTS（N、B）-1030 | 1050×3000 | 1600 | 1000-4500 | 2000-6000 | 70-120 | 200 | 7.5 | 22 | 4500 |
| 9 | CTS（N、B）-1230 | 1200×3000 | 1600 | 1000-4500 | 2000-6000 | 70-120 | 200 | 11 | 22 | 5000 |
| 10 | CTS（N、B）-1240 | 1200×4000 | 1600 | 1000-4500 | 2000-6000 | 100-150 | 250 | 15 | 22 | 6000 |
| 11 | CTS（N、B）-1530 | 1500×3000 | 1800 | 1000-4500 | 2000-6000 | 120-150 | 220 | 15 | 20 | 6500 |
| 12 | CTS（N、B）-1540 | 1500×4000 | 1800 | 1000-4500 | 2000-6000 | 150-180 | 300 | 18.5 | 20 | 8000 |
| Note:The strength of the magnetic field can be customized according to customer requirements,from 800gs-10000gs.piease indicate in the contract. | ||||||||||
Online Message