Weifang Baite Magnet Technology co.,Ltd.
Weifang Baite Magnet Technology co.,Ltd.
Introduction
For eliminate the ferromagnetic material with its powerful magnetic field, magnetic force and high iron-cleaning efficiency from powder or granular non
magnetic material.
With the soft magnetic material to transmit magnetic force and the computerized simulating design for the magnetic roller and disk, the loss of magnetic
field is reduced remarkably with the added no class changes vibrating device, To achieve the best eliminating efficiency, we use the frequency-change and
unique weighing sensing technology to keep the material in the required date, Additionally, we used the magnetized disk with strong magnetic field before
iron-elimination. As material passes disk, the weak magnetic material is magnetized.
It is specially designed for magnetic clean iron ore,especially suitable for weathered sand, sand, ant volcano rocks and other soft ore, It c an be also used for
the roughing separation and conce ntration of the low grade magnetic minerals.
Feature:
--With wide separation size range, it can be widely used in 0-60mm sand (stone) selection. An d the grade of the concentrate can be adjusted between 8-30
grade according to user’ needs .
--The rate of the iron ore recovery is high, it is about 20%- 50% higher than the traditional roller recovery, and the yield increases 30%-60°/0 at the same¬time.
--The intensity of the magnetic field is high (up to 1000gs)，with the following advantages: uniform distribution, large iron magnetic penetration depth, strong
adhesion, long service life.
--It also has the advantages of simple structure, convenient use and maintenance.
-- Made of high magnetic rare earth (above 45 MGOe) with high intensity(1.3T~1.5T), high gradient and high specific magnetization.
-- Various vibration feeder for thin or thick layers of materials.
-- Super thin belt for conveyor and separation.
-- Up to four rollers for better concentration and higher recover
Technical Parameter
| NO. | Model | The length of the roller (mm) | Magnetic induction density (GS) | Belt depth (mm) | Material size （um） | Capacity (T/h) | Driving Power（kw） |
| 1 | ZXG-150-Ⅰ | Φ150×（800-1500） | 10000-18000 | 0.5-3 | 0-10 | 1-3 | 1.1 |
| 2 | ZXG-150-n | 1.1×n | |||||
| 3 | ZXG-220-Ⅰ | Φ220×（800-2000） | 1.5-8 | 1.1 | |||
| 4 | ZXG-220-n | 1.1×n | |||||
| 5 | ZXG-320-Ⅰ | Φ320×（1000-2000） | 4-15 | 2.2 | |||
| 6 | ZXG-320-n | 2.2×n | |||||
| 7 | ZXG-380-Ⅰ | Φ380×（1000-2000） | 7-20 | 3.0 | |||
| 8 | ZXG-380-n | 3.0×n | |||||
| 9 | ZXG-500-Ⅰ | Φ500×（1500-3000） | 12-30 | 5.5 | |||
| 10 | ZXG-500-n | 5.5×n | |||||
| 11 | ZXG-800-Ⅰ | Φ800×（1500-3000） | 15-50 | 7.5 | |||
| 12 | ZXG-800-n | 7.5×n |
Introduction
For eliminate the ferromagnetic material with its powerful magnetic field, magnetic force and high iron-cleaning efficiency from powder or granular non
magnetic material.
With the soft magnetic material to transmit magnetic force and the computerized simulating design for the magnetic roller and disk, the loss of magnetic
field is reduced remarkably with the added no class changes vibrating device, To achieve the best eliminating efficiency, we use the frequency-change and
unique weighing sensing technology to keep the material in the required date, Additionally, we used the magnetized disk with strong magnetic field before
iron-elimination. As material passes disk, the weak magnetic material is magnetized.
It is specially designed for magnetic clean iron ore,especially suitable for weathered sand, sand, ant volcano rocks and other soft ore, It c an be also used for
the roughing separation and conce ntration of the low grade magnetic minerals.
Feature:
--With wide separation size range, it can be widely used in 0-60mm sand (stone) selection. An d the grade of the concentrate can be adjusted between 8-30
grade according to user’ needs .
--The rate of the iron ore recovery is high, it is about 20%- 50% higher than the traditional roller recovery, and the yield increases 30%-60°/0 at the same¬time.
--The intensity of the magnetic field is high (up to 1000gs)，with the following advantages: uniform distribution, large iron magnetic penetration depth, strong
adhesion, long service life.
--It also has the advantages of simple structure, convenient use and maintenance.
-- Made of high magnetic rare earth (above 45 MGOe) with high intensity(1.3T~1.5T), high gradient and high specific magnetization.
-- Various vibration feeder for thin or thick layers of materials.
-- Super thin belt for conveyor and separation.
-- Up to four rollers for better concentration and higher recover
Technical Parameter
| NO. | Model | The length of the roller (mm) | Magnetic induction density (GS) | Belt depth (mm) | Material size （um） | Capacity (T/h) | Driving Power（kw） |
| 1 | ZXG-150-Ⅰ | Φ150×（800-1500） | 10000-18000 | 0.5-3 | 0-10 | 1-3 | 1.1 |
| 2 | ZXG-150-n | 1.1×n | |||||
| 3 | ZXG-220-Ⅰ | Φ220×（800-2000） | 1.5-8 | 1.1 | |||
| 4 | ZXG-220-n | 1.1×n | |||||
| 5 | ZXG-320-Ⅰ | Φ320×（1000-2000） | 4-15 | 2.2 | |||
| 6 | ZXG-320-n | 2.2×n | |||||
| 7 | ZXG-380-Ⅰ | Φ380×（1000-2000） | 7-20 | 3.0 | |||
| 8 | ZXG-380-n | 3.0×n | |||||
| 9 | ZXG-500-Ⅰ | Φ500×（1500-3000） | 12-30 | 5.5 | |||
| 10 | ZXG-500-n | 5.5×n | |||||
| 11 | ZXG-800-Ⅰ | Φ800×（1500-3000） | 15-50 | 7.5 | |||
| 12 | ZXG-800-n | 7.5×n |
Online Message